add¶

hg add [OPTION]... [FILE]...

Schedule files to be version controlled and added to the repository.

The files will be added to the repository at the next commit. To undo an add before that, see hg forget.

If no names are given, add all files to the repository.

An example showing how new (unknown) files are added automatically by hg add:

$ ls
foo.c
$ hg status
? foo.c
$ hg add
adding foo.c
$ hg status
A foo.c

Returns 0 if all files are successfully added.

Options:

addremove¶

hg addremove [OPTION]... [FILE]...

Add all new files and remove all missing files from the repository.

New files are ignored if they match any of the patterns in .hgignore. As with add, these changes take effect at the next commit.

Use the -s/--similarity option to detect renamed files. This option takes a percentage between 0 (disabled) and 100 (files must be identical) as its parameter. With a parameter greater than 0, this compares every removed file with every added file and records those similar enough as renames. Detecting renamed files this way can be expensive. After using this option, hg status -C can be used to check which files were identified as moved or renamed. If not specified, -s/--similarity defaults to 100 and only renames of identical files are detected.

Returns 0 if all files are successfully added.

Options:

annotate¶

hg annotate [-r REV] [-f] [-a] [-u] [-d] [-n] [-c] [-l] FILE...

List changes in files, showing the revision id responsible for each line

This command is useful for discovering when a change was made and by whom.

Without the -a/--text option, annotate will avoid processing files it detects as binary. With -a, annotate will annotate the file anyway, although the results will probably be neither useful nor desirable.

Returns 0 on success.

Options:

archive¶

hg archive [OPTION]... DEST

By default, the revision used is the parent of the working directory; use -r/--rev to specify a different revision.

The archive type is automatically detected based on file extension (or override using -t/--type).

Examples:

Valid types are:

The exact name of the destination archive or directory is given using a format string; see hg help export for details.

Each member added to an archive file has a directory prefix prepended. Use -p/--prefix to specify a format string for the prefix. The default is the basename of the archive, with suffixes removed.

Returns 0 on success.

Options:

backout¶

hg backout [OPTION]... [-r] REV

Prepare a new changeset with the effect of REV undone in the current working directory.

If REV is the parent of the working directory, then this new changeset is committed automatically. Otherwise, hg needs to merge the changes and the merged result is left uncommitted.

Note

backout cannot be used to fix either an unwanted or incorrect merge.

By default, the pending changeset will have one parent, maintaining a linear history. With --merge, the pending changeset will instead have two parents: the old parent of the working directory and a new child of REV that simply undoes REV.

Before version 1.7, the behavior without --merge was equivalent to specifying --merge followed by hg update --clean . to cancel the merge and leave the child of REV as a head to be merged separately.

See hg help dates for a list of formats valid for -d/--date.

Returns 0 on success.

Options:

bisect¶

hg bisect [-gbsr] [-U] [-c CMD] [REV]

This command helps to find changesets which introduce problems. To use, mark the earliest changeset you know exhibits the problem as bad, then mark the latest changeset which is free from the problem as good. Bisect will update your working directory to a revision for testing (unless the -U/--noupdate option is specified). Once you have performed tests, mark the working directory as good or bad, and bisect will either update to another candidate changeset or announce that it has found the bad revision.

As a shortcut, you can also use the revision argument to mark a revision as good or bad without checking it out first.

If you supply a command, it will be used for automatic bisection. The environment variable HG_NODE will contain the ID of the changeset being tested. The exit status of the command will be used to mark revisions as good or bad: status 0 means good, 125 means to skip the revision, 127 (command not found) will abort the bisection, and any other non-zero exit status means the revision is bad.

Some examples:

See hg help revsets for more about the bisect() keyword.

Returns 0 on success.

Options:

bookmarks¶

hg bookmarks [-f] [-d] [-i] [-m NAME] [-r REV] [NAME]

Bookmarks are pointers to certain commits that move when committing. Bookmarks are local. They can be renamed, copied and deleted. It is possible to use hg merge NAME to merge from a given bookmark, and hg update NAME to update to a given bookmark.

You can use hg bookmark NAME to set a bookmark on the working directory's parent revision with the given name. If you specify a revision using -r REV (where REV may be an existing bookmark), the bookmark is assigned to that revision.

Bookmarks can be pushed and pulled between repositories (see hg help push and hg help pull). This requires both the local and remote repositories to support bookmarks. For versions prior to 1.8, this means the bookmarks extension must be enabled.

If you set a bookmark called '@', new clones of the repository will have that revision checked out (and the bookmark made active) by default.

With -i/--inactive, the new bookmark will not be made the active bookmark. If -r/--rev is given, the new bookmark will not be made active even if -i/--inactive is not given. If no NAME is given, the current active bookmark will be marked inactive.

Options:

branch¶

hg branch [-fC] [NAME]

Note

Branch names are permanent and global. Use hg bookmark to create a light-weight bookmark instead. See hg help glossary for more information about named branches and bookmarks.

With no argument, show the current branch name. With one argument, set the working directory branch name (the branch will not exist in the repository until the next commit). Standard practice recommends that primary development take place on the 'default' branch.

Unless -f/--force is specified, branch will not let you set a branch name that already exists, even if it's inactive.

Use -C/--clean to reset the working directory branch to that of the parent of the working directory, negating a previous branch change.

Use the command hg update to switch to an existing branch. Use hg commit --close-branch to mark this branch as closed.

Returns 0 on success.

Options:

branches¶

hg branches [-ac]

List the repository's named branches, indicating which ones are inactive. If -c/--closed is specified, also list branches which have been marked closed (see hg commit --close-branch).

If -a/--active is specified, only show active branches. A branch is considered active if it contains repository heads.

Use the command hg update to switch to an existing branch.

Returns 0.

Options:

bundle¶

hg bundle [-f] [-t TYPE] [-a] [-r REV]... [--base REV]... FILE [DEST]

Generate a compressed changegroup file collecting changesets not known to be in another repository.

If you omit the destination repository, then hg assumes the destination will have all the nodes you specify with --base parameters. To create a bundle containing all changesets, use -a/--all (or --base null).

You can change compression method with the -t/--type option. The available compression methods are: none, bzip2, and gzip (by default, bundles are compressed using bzip2).

The bundle file can then be transferred using conventional means and applied to another repository with the unbundle or pull command. This is useful when direct push and pull are not available or when exporting an entire repository is undesirable.

Applying bundles preserves all changeset contents including permissions, copy/rename information, and revision history.

Returns 0 on success, 1 if no changes found.

Options:

cat¶

hg cat [OPTION]... FILE...

Print the specified files as they were at the given revision. If no revision is given, the parent of the working directory is used, or tip if no revision is checked out.

Output may be to a file, in which case the name of the file is given using a format string. The formatting rules are the same as for the export command, with the following additions:

Returns 0 on success.

Options:

clone¶

hg clone [OPTION]... SOURCE [DEST]

Create a copy of an existing repository in a new directory.

If no destination directory name is specified, it defaults to the basename of the source.

The location of the source is added to the new repository's .hg/hgrc file, as the default to be used for future pulls.

Only local paths and ssh:// URLs are supported as destinations. For ssh:// destinations, no working directory or .hg/hgrc will be created on the remote side.

To pull only a subset of changesets, specify one or more revisions identifiers with -r/--rev or branches with -b/--branch. The resulting clone will contain only the specified changesets and their ancestors. These options (or 'clone src#rev dest') imply --pull, even for local source repositories. Note that specifying a tag will include the tagged changeset but not the changeset containing the tag.

If the source repository has a bookmark called '@' set, that revision will be checked out in the new repository by default.

To check out a particular version, use -u/--update, or -U/--noupdate to create a clone with no working directory.

For efficiency, hardlinks are used for cloning whenever the source and destination are on the same filesystem (note this applies only to the repository data, not to the working directory). Some filesystems, such as AFS, implement hardlinking incorrectly, but do not report errors. In these cases, use the --pull option to avoid hardlinking.

In some cases, you can clone repositories and the working directory using full hardlinks with

$ cp -al REPO REPOCLONE

This is the fastest way to clone, but it is not always safe. The operation is not atomic (making sure REPO is not modified during the operation is up to you) and you have to make sure your editor breaks hardlinks (Emacs and most Linux Kernel tools do so). Also, this is not compatible with certain extensions that place their metadata under the .hg directory, such as mq.

Mercurial will update the working directory to the first applicable revision from this list:

Examples:

See hg help urls for details on specifying URLs.

Returns 0 on success.

Options:

commit¶

hg commit [OPTION]... [FILE]...

Commit changes to the given files into the repository. Unlike a centralized SCM, this operation is a local operation. See hg push for a way to actively distribute your changes.

If a list of files is omitted, all changes reported by hg status will be committed.

If you are committing the result of a merge, do not provide any filenames or -I/-X filters.

If no commit message is specified, Mercurial starts your configured editor where you can enter a message. In case your commit fails, you will find a backup of your message in .hg/last-message.txt.

The --amend flag can be used to amend the parent of the working directory with a new commit that contains the changes in the parent in addition to those currently reported by hg status, if there are any. The old commit is stored in a backup bundle in .hg/strip-backup (see hg help bundle and hg help unbundle on how to restore it).

Message, user and date are taken from the amended commit unless specified. When a message isn't specified on the command line, the editor will open with the message of the amended commit.

It is not possible to amend public changesets (see hg help phases) or changesets that have children.

See hg help dates for a list of formats valid for -d/--date.

Returns 0 on success, 1 if nothing changed.

Options:

copy¶

hg copy [OPTION]... [SOURCE]... DEST

Mark dest as having copies of source files. If dest is a directory, copies are put in that directory. If dest is a file, the source must be a single file.

By default, this command copies the contents of files as they exist in the working directory. If invoked with -A/--after, the operation is recorded, but no copying is performed.

This command takes effect with the next commit. To undo a copy before that, see hg revert.

Returns 0 on success, 1 if errors are encountered.

Options:

diff¶

hg diff [OPTION]... ([-c REV] | [-r REV1 [-r REV2]]) [FILE]...

Show differences between revisions for the specified files.

Differences between files are shown using the unified diff format.

Note

diff may generate unexpected results for merges, as it will default to comparing against the working directory's first parent changeset if no revisions are specified.

When two revision arguments are given, then changes are shown between those revisions. If only one revision is specified then that revision is compared to the working directory, and, when no revisions are specified, the working directory files are compared to its parent.

Alternatively you can specify -c/--change with a revision to see the changes in that changeset relative to its first parent.

Without the -a/--text option, diff will avoid generating diffs of files it detects as binary. With -a, diff will generate a diff anyway, probably with undesirable results.

Use the -g/--git option to generate diffs in the git extended diff format. For more information, read hg help diffs.

Examples:

Returns 0 on success.

Options:

export¶

hg export [OPTION]... [-o OUTFILESPEC] [-r] [REV]...

Print the changeset header and diffs for one or more revisions. If no revision is given, the parent of the working directory is used.

The information shown in the changeset header is: author, date, branch name (if non-default), changeset hash, parent(s) and commit comment.

Note

export may generate unexpected diff output for merge changesets, as it will compare the merge changeset against its first parent only.

Output may be to a file, in which case the name of the file is given using a format string. The formatting rules are as follows:

Without the -a/--text option, export will avoid generating diffs of files it detects as binary. With -a, export will generate a diff anyway, probably with undesirable results.

Use the -g/--git option to generate diffs in the git extended diff format. See hg help diffs for more information.

With the --switch-parent option, the diff will be against the second parent. It can be useful to review a merge.

Examples:

Returns 0 on success.

Options:

forget¶

hg forget [OPTION]... FILE...

Mark the specified files so they will no longer be tracked after the next commit.

This only removes files from the current branch, not from the entire project history, and it does not delete them from the working directory.

To undo a forget before the next commit, see hg add.

Examples:

Returns 0 on success.

Options:

graft¶

hg graft [OPTION]... [-r] REV...

This command uses Mercurial's merge logic to copy individual changes from other branches without merging branches in the history graph. This is sometimes known as 'backporting' or 'cherry-picking'. By default, graft will copy user, date, and description from the source changesets.

Changesets that are ancestors of the current revision, that have already been grafted, or that are merges will be skipped.

If --log is specified, log messages will have a comment appended of the form:

(grafted from CHANGESETHASH)

If a graft merge results in conflicts, the graft process is interrupted so that the current merge can be manually resolved. Once all conflicts are addressed, the graft process can be continued with the -c/--continue option.

Note

The -c/--continue option does not reapply earlier options.

Examples:

Returns 0 on successful completion.

Options:

grep¶

hg grep [OPTION]... PATTERN [FILE]...

Search revisions of files for a regular expression.

This command behaves differently than Unix grep. It only accepts Python/Perl regexps. It searches repository history, not the working directory. It always prints the revision number in which a match appears.

By default, grep only prints output for the first revision of a file in which it finds a match. To get it to print every revision that contains a change in match status ("-" for a match that becomes a non-match, or "+" for a non-match that becomes a match), use the --all flag.

Returns 0 if a match is found, 1 otherwise.

Options:

heads¶

hg heads [-ct] [-r STARTREV] [REV]...

With no arguments, show all repository branch heads.

Repository "heads" are changesets with no child changesets. They are where development generally takes place and are the usual targets for update and merge operations. Branch heads are changesets that have no child changeset on the same branch.

If one or more REVs are given, only branch heads on the branches associated with the specified changesets are shown. This means that you can use hg heads foo to see the heads on a branch named foo.

If -c/--closed is specified, also show branch heads marked closed (see hg commit --close-branch).

If STARTREV is specified, only those heads that are descendants of STARTREV will be displayed.

If -t/--topo is specified, named branch mechanics will be ignored and only changesets without children will be shown.

Returns 0 if matching heads are found, 1 if not.

Options:

help¶

hg help [-ec] [TOPIC]

With no arguments, print a list of commands with short help messages.

Given a topic, extension, or command name, print help for that topic.

Returns 0 if successful.

Options:

identify¶

hg identify [-nibtB] [-r REV] [SOURCE]

Print a summary identifying the repository state at REV using one or two parent hash identifiers, followed by a "+" if the working directory has uncommitted changes, the branch name (if not default), a list of tags, and a list of bookmarks.

When REV is not given, print a summary of the current state of the repository.

Specifying a path to a repository root or Mercurial bundle will cause lookup to operate on that repository/bundle.

Examples:

Returns 0 if successful.

Options:

import¶

hg import [OPTION]... PATCH...

Import a list of patches and commit them individually (unless --no-commit is specified).

If there are outstanding changes in the working directory, import will abort unless given the -f/--force flag.

You can import a patch straight from a mail message. Even patches as attachments work (to use the body part, it must have type text/plain or text/x-patch). From and Subject headers of email message are used as default committer and commit message. All text/plain body parts before first diff are added to commit message.

If the imported patch was generated by hg export, user and description from patch override values from message headers and body. Values given on command line with -m/--message and -u/--user override these.

If --exact is specified, import will set the working directory to the parent of each patch before applying it, and will abort if the resulting changeset has a different ID than the one recorded in the patch. This may happen due to character set problems or other deficiencies in the text patch format.

Use --bypass to apply and commit patches directly to the repository, not touching the working directory. Without --exact, patches will be applied on top of the working directory parent revision.

With -s/--similarity, hg will attempt to discover renames and copies in the patch in the same way as hg addremove.

To read a patch from standard input, use "-" as the patch name. If a URL is specified, the patch will be downloaded from it. See hg help dates for a list of formats valid for -d/--date.

Examples:

Returns 0 on success.

Options:

incoming¶

hg incoming [-p] [-n] [-M] [-f] [-r REV]... [--bundle FILENAME] [SOURCE]

Show new changesets found in the specified path/URL or the default pull location. These are the changesets that would have been pulled if a pull at the time you issued this command.

For remote repository, using --bundle avoids downloading the changesets twice if the incoming is followed by a pull.

See pull for valid source format details.

Returns 0 if there are incoming changes, 1 otherwise.

Options:

init¶

hg init [-e CMD] [--remotecmd CMD] [DEST]

Initialize a new repository in the given directory. If the given directory does not exist, it will be created.

If no directory is given, the current directory is used.

It is possible to specify an ssh:// URL as the destination. See hg help urls for more information.

Returns 0 on success.

Options:

locate¶

hg locate [OPTION]... [PATTERN]...

Print files under Mercurial control in the working directory whose names match the given patterns.

By default, this command searches all directories in the working directory. To search just the current directory and its subdirectories, use "--include .".

If no patterns are given to match, this command prints the names of all files under Mercurial control in the working directory.

If you want to feed the output of this command into the "xargs" command, use the -0 option to both this command and "xargs". This will avoid the problem of "xargs" treating single filenames that contain whitespace as multiple filenames.

Returns 0 if a match is found, 1 otherwise.

Options:

log¶

hg log [OPTION]... [FILE]

Print the revision history of the specified files or the entire project.

If no revision range is specified, the default is tip:0 unless --follow is set, in which case the working directory parent is used as the starting revision.

File history is shown without following rename or copy history of files. Use -f/--follow with a filename to follow history across renames and copies. --follow without a filename will only show ancestors or descendants of the starting revision.

By default this command prints revision number and changeset id, tags, non-trivial parents, user, date and time, and a summary for each commit. When the -v/--verbose switch is used, the list of changed files and full commit message are shown.

Note

log -p/--patch may generate unexpected diff output for merge changesets, as it will only compare the merge changeset against its first parent. Also, only files different from BOTH parents will appear in files:.

Note

for performance reasons, log FILE may omit duplicate changes made on branches and will not show deletions. To see all changes including duplicates and deletions, use the --removed switch.

Some examples:

See hg help dates for a list of formats valid for -d/--date.

See hg help revisions and hg help revsets for more about specifying revisions.

See hg help templates for more about pre-packaged styles and specifying custom templates.

Returns 0 on success.

Options:

manifest¶

hg manifest [-r REV]

Print a list of version controlled files for the given revision. If no revision is given, the first parent of the working directory is used, or the null revision if no revision is checked out.

With -v, print file permissions, symlink and executable bits. With --debug, print file revision hashes.

If option --all is specified, the list of all files from all revisions is printed. This includes deleted and renamed files.

Returns 0 on success.

Options:

merge¶

hg merge [-P] [-f] [[-r] REV]

The current working directory is updated with all changes made in the requested revision since the last common predecessor revision.

Files that changed between either parent are marked as changed for the next commit and a commit must be performed before any further updates to the repository are allowed. The next commit will have two parents.

--tool can be used to specify the merge tool used for file merges. It overrides the HGMERGE environment variable and your configuration files. See hg help merge-tools for options.

If no revision is specified, the working directory's parent is a head revision, and the current branch contains exactly one other head, the other head is merged with by default. Otherwise, an explicit revision with which to merge with must be provided.

hg resolve must be used to resolve unresolved files.

To undo an uncommitted merge, use hg update --clean . which will check out a clean copy of the original merge parent, losing all changes.

Returns 0 on success, 1 if there are unresolved files.

Options:

outgoing¶

hg outgoing [-M] [-p] [-n] [-f] [-r REV]... [DEST]

Show changesets not found in the specified destination repository or the default push location. These are the changesets that would be pushed if a push was requested.

See pull for details of valid destination formats.

Returns 0 if there are outgoing changes, 1 otherwise.

Options:

parents¶

hg parents [-r REV] [FILE]

Print the working directory's parent revisions. If a revision is given via -r/--rev, the parent of that revision will be printed. If a file argument is given, the revision in which the file was last changed (before the working directory revision or the argument to --rev if given) is printed.

Returns 0 on success.

Options:

paths¶

hg paths [NAME]

Show definition of symbolic path name NAME. If no name is given, show definition of all available names.

Option -q/--quiet suppresses all output when searching for NAME and shows only the path names when listing all definitions.

Path names are defined in the [paths] section of your configuration file and in /etc/mercurial/hgrc. If run inside a repository, .hg/hgrc is used, too.

The path names default and default-push have a special meaning. When performing a push or pull operation, they are used as fallbacks if no location is specified on the command-line. When default-push is set, it will be used for push and default will be used for pull; otherwise default is used as the fallback for both. When cloning a repository, the clone source is written as default in .hg/hgrc. Note that default and default-push apply to all inbound (e.g. hg incoming) and outbound (e.g. hg outgoing, hg email and hg bundle) operations.

See hg help urls for more information.

Returns 0 on success.

phase¶

hg phase [-p|-d|-s] [-f] [-r] REV...

With no argument, show the phase name of specified revisions.

With one of -p/--public, -d/--draft or -s/--secret, change the phase value of the specified revisions.

Unless -f/--force is specified, hg phase won't move changeset from a lower phase to an higher phase. Phases are ordered as follows:

public < draft < secret

Return 0 on success, 1 if no phases were changed or some could not be changed.

Options:

pull¶

hg pull [-u] [-f] [-r REV]... [-e CMD] [--remotecmd CMD] [SOURCE]

Pull changes from a remote repository to a local one.

This finds all changes from the repository at the specified path or URL and adds them to a local repository (the current one unless -R is specified). By default, this does not update the copy of the project in the working directory.

Use hg incoming if you want to see what would have been added by a pull at the time you issued this command. If you then decide to add those changes to the repository, you should use hg pull -r X where X is the last changeset listed by hg incoming.

If SOURCE is omitted, the 'default' path will be used. See hg help urls for more information.

Returns 0 on success, 1 if an update had unresolved files.

Options:

push¶

hg push [-f] [-r REV]... [-e CMD] [--remotecmd CMD] [DEST]

Push changesets from the local repository to the specified destination.

This operation is symmetrical to pull: it is identical to a pull in the destination repository from the current one.

By default, push will not allow creation of new heads at the destination, since multiple heads would make it unclear which head to use. In this situation, it is recommended to pull and merge before pushing.

Use --new-branch if you want to allow push to create a new named branch that is not present at the destination. This allows you to only create a new branch without forcing other changes.

Use -f/--force to override the default behavior and push all changesets on all branches.

If -r/--rev is used, the specified revision and all its ancestors will be pushed to the remote repository.

If -B/--bookmark is used, the specified bookmarked revision, its ancestors, and the bookmark will be pushed to the remote repository.

Please see hg help urls for important details about ssh:// URLs. If DESTINATION is omitted, a default path will be used.

Returns 0 if push was successful, 1 if nothing to push.

Options:

recover¶

hg recover

Recover from an interrupted commit or pull.

This command tries to fix the repository status after an interrupted operation. It should only be necessary when Mercurial suggests it.

Returns 0 if successful, 1 if nothing to recover or verify fails.

remove¶

hg remove [OPTION]... FILE...

Schedule the indicated files for removal from the current branch.

This command schedules the files to be removed at the next commit. To undo a remove before that, see hg revert. To undo added files, see hg forget.

-A/--after can be used to remove only files that have already been deleted, -f/--force can be used to force deletion, and -Af can be used to remove files from the next revision without deleting them from the working directory.

The following table details the behavior of remove for different file states (columns) and option combinations (rows). The file states are Added [A], Clean [C], Modified [M] and Missing [!] (as reported by hg status). The actions are Warn, Remove (from branch) and Delete (from disk):

Note that remove never deletes files in Added [A] state from the working directory, not even if option --force is specified.

Returns 0 on success, 1 if any warnings encountered.

Options:

rename¶

hg rename [OPTION]... SOURCE... DEST

Mark dest as copies of sources; mark sources for deletion. If dest is a directory, copies are put in that directory. If dest is a file, there can only be one source.

By default, this command copies the contents of files as they exist in the working directory. If invoked with -A/--after, the operation is recorded, but no copying is performed.

This command takes effect at the next commit. To undo a rename before that, see hg revert.

Returns 0 on success, 1 if errors are encountered.

Options:

resolve¶

hg resolve [OPTION]... [FILE]...

Merges with unresolved conflicts are often the result of non-interactive merging using the internal:merge configuration setting, or a command-line merge tool like diff3. The resolve command is used to manage the files involved in a merge, after hg merge has been run, and before hg commit is run (i.e. the working directory must have two parents). See hg help merge-tools for information on configuring merge tools.

The resolve command can be used in the following ways:

Note that Mercurial will not let you commit files with unresolved merge conflicts. You must use hg resolve -m ... before you can commit after a conflicting merge.

Returns 0 on success, 1 if any files fail a resolve attempt.

Options:

revert¶

hg revert [OPTION]... [-r REV] [NAME]...

Note

To check out earlier revisions, you should use hg update REV. To cancel an uncommitted merge (and lose your changes), use hg update --clean ..

With no revision specified, revert the specified files or directories to the contents they had in the parent of the working directory. This restores the contents of files to an unmodified state and unschedules adds, removes, copies, and renames. If the working directory has two parents, you must explicitly specify a revision.

Using the -r/--rev or -d/--date options, revert the given files or directories to their states as of a specific revision. Because revert does not change the working directory parents, this will cause these files to appear modified. This can be helpful to "back out" some or all of an earlier change. See hg backout for a related method.

Modified files are saved with a .orig suffix before reverting. To disable these backups, use --no-backup.

See hg help dates for a list of formats valid for -d/--date.

Returns 0 on success.

Options:

rollback¶

hg rollback

This command should be used with care. There is only one level of rollback, and there is no way to undo a rollback. It will also restore the dirstate at the time of the last transaction, losing any dirstate changes since that time. This command does not alter the working directory.

Transactions are used to encapsulate the effects of all commands that create new changesets or propagate existing changesets into a repository.

For example, the following commands are transactional, and their effects can be rolled back:

To avoid permanent data loss, rollback will refuse to rollback a commit transaction if it isn't checked out. Use --force to override this protection.

This command is not intended for use on public repositories. Once changes are visible for pull by other users, rolling a transaction back locally is ineffective (someone else may already have pulled the changes). Furthermore, a race is possible with readers of the repository; for example an in-progress pull from the repository may fail if a rollback is performed.

Returns 0 on success, 1 if no rollback data is available.

Options:

root¶

hg root

Print the root directory of the current repository.

Returns 0 on success.

serve¶

hg serve [OPTION]...

Start a local HTTP repository browser and pull server. You can use this for ad-hoc sharing and browsing of repositories. It is recommended to use a real web server to serve a repository for longer periods of time.

Please note that the server does not implement access control. This means that, by default, anybody can read from the server and nobody can write to it by default. Set the web.allow_push option to * to allow everybody to push to the server. You should use a real web server if you need to authenticate users.

By default, the server logs accesses to stdout and errors to stderr. Use the -A/--accesslog and -E/--errorlog options to log to files.

To have the server choose a free port number to listen on, specify a port number of 0; in this case, the server will print the port number it uses.

Returns 0 on success.

Options:

showconfig¶

hg showconfig [-u] [NAME]...

With no arguments, print names and values of all config items.

With one argument of the form section.name, print just the value of that config item.

With multiple arguments, print names and values of all config items with matching section names.

With --debug, the source (filename and line number) is printed for each config item.

Returns 0 on success.

Options:

status¶

hg status [OPTION]... [FILE]...

Show status of files in the repository. If names are given, only files that match are shown. Files that are clean or ignored or the source of a copy/move operation, are not listed unless -c/--clean, -i/--ignored, -C/--copies or -A/--all are given. Unless options described with "show only ..." are given, the options -mardu are used.

Option -q/--quiet hides untracked (unknown and ignored) files unless explicitly requested with -u/--unknown or -i/--ignored.

Note

status may appear to disagree with diff if permissions have changed or a merge has occurred. The standard diff format does not report permission changes and diff only reports changes relative to one merge parent.

If one revision is given, it is used as the base revision. If two revisions are given, the differences between them are shown. The --change option can also be used as a shortcut to list the changed files of a revision from its first parent.

The codes used to show the status of files are:

M = modified
A = added
R = removed
C = clean
! = missing (deleted by non-hg command, but still tracked)
? = not tracked
I = ignored


  = origin of the previous file listed as A (added)

Examples:

Returns 0 on success.

Options:

summary¶

hg summary [--remote]

This generates a brief summary of the working directory state, including parents, branch, commit status, and available updates.

With the --remote option, this will check the default paths for incoming and outgoing changes. This can be time-consuming.

Returns 0 on success.

Options:

tag¶

hg tag [-f] [-l] [-m TEXT] [-d DATE] [-u USER] [-r REV] NAME...

Name a particular revision using <name>.

Tags are used to name particular revisions of the repository and are very useful to compare different revisions, to go back to significant earlier versions or to mark branch points as releases, etc. Changing an existing tag is normally disallowed; use -f/--force to override.

If no revision is given, the parent of the working directory is used, or tip if no revision is checked out.

To facilitate version control, distribution, and merging of tags, they are stored as a file named ".hgtags" which is managed similarly to other project files and can be hand-edited if necessary. This also means that tagging creates a new commit. The file ".hg/localtags" is used for local tags (not shared among repositories).

Tag commits are usually made at the head of a branch. If the parent of the working directory is not a branch head, hg tag aborts; use -f/--force to force the tag commit to be based on a non-head changeset.

See hg help dates for a list of formats valid for -d/--date.

Since tag names have priority over branch names during revision lookup, using an existing branch name as a tag name is discouraged.

Returns 0 on success.

Options:

tags¶

hg tags

This lists both regular and local tags. When the -v/--verbose switch is used, a third column "local" is printed for local tags.

Returns 0 on success.

tip¶

hg tip [-p] [-g]

The tip revision (usually just called the tip) is the changeset most recently added to the repository (and therefore the most recently changed head).

If you have just made a commit, that commit will be the tip. If you have just pulled changes from another repository, the tip of that repository becomes the current tip. The "tip" tag is special and cannot be renamed or assigned to a different changeset.

Returns 0 on success.

Options:

unbundle¶

hg unbundle [-u] FILE...

Apply one or more compressed changegroup files generated by the bundle command.

Returns 0 on success, 1 if an update has unresolved files.

Options:

update¶

hg update [-c] [-C] [-d DATE] [[-r] REV]

Update the repository's working directory to the specified changeset. If no changeset is specified, update to the tip of the current named branch and move the current bookmark (see hg help bookmarks).

Update sets the working directory's parent revision to the specified changeset (see hg help parents).

If the changeset is not a descendant or ancestor of the working directory's parent, the update is aborted. With the -c/--check option, the working directory is checked for uncommitted changes; if none are found, the working directory is updated to the specified changeset.

The following rules apply when the working directory contains uncommitted changes:

To cancel an uncommitted merge (and lose your changes), use hg update --clean ..

Use null as the changeset to remove the working directory (like hg clone -U).

If you want to revert just one file to an older revision, use hg revert [-r REV] NAME.

See hg help dates for a list of formats valid for -d/--date.

Returns 0 on success, 1 if there are unresolved files.

Options:

verify¶

hg verify

Verify the integrity of the current repository.

This will perform an extensive check of the repository's integrity, validating the hashes and checksums of each entry in the changelog, manifest, and tracked files, as well as the integrity of their crosslinks and indices.

Please see http://mercurial.selenic.com/wiki/RepositoryCorruption for more information about recovery from corruption of the repository.

Returns 0 on success, 1 if errors are encountered.

version¶

hg version

output version and copyright information

Synopsis¶

The Mercurial system uses a file called .hgignore in the root directory of a repository to control its behavior when it searches for files that it is not currently tracking.

Description¶

The working directory of a Mercurial repository will often contain files that should not be tracked by Mercurial. These include backup files created by editors and build products created by compilers. These files can be ignored by listing them in a .hgignore file in the root of the working directory. The .hgignore file must be created manually. It is typically put under version control, so that the settings will propagate to other repositories with push and pull.

An untracked file is ignored if its path relative to the repository root directory, or any prefix path of that path, is matched against any pattern in .hgignore.

For example, say we have an untracked file, file.c, at a/b/file.c inside our repository. Mercurial will ignore file.c if any pattern in .hgignore matches a/b/file.c, a/b or a.

In addition, a Mercurial configuration file can reference a set of per-user or global ignore files. See the ignore configuration key on the [ui] section of hg help config for details of how to configure these files.

To control Mercurial's handling of files that it manages, many commands support the -I and -X options; see hg help <command> and hg help patterns for details.

Files that are already tracked are not affected by .hgignore, even if they appear in .hgignore. An untracked file X can be explicitly added with hg add X, even if X would be excluded by a pattern in .hgignore.

Syntax¶

An ignore file is a plain text file consisting of a list of patterns, with one pattern per line. Empty lines are skipped. The # character is treated as a comment character, and the \ character is treated as an escape character.

Mercurial supports several pattern syntaxes. The default syntax used is Python/Perl-style regular expressions.

To change the syntax used, use a line of the following form:

syntax: NAME

where NAME is one of the following:

The chosen syntax stays in effect when parsing all patterns that follow, until another syntax is selected.

Neither glob nor regexp patterns are rooted. A glob-syntax pattern of the form *.c will match a file ending in .c in any directory, and a regexp pattern of the form \.c$ will do the same. To root a regexp pattern, start it with ^.

Note

Patterns specified in other than .hgignore are always rooted. Please see hg help patterns for details.

Example¶

Here is an example ignore file.

# use glob syntax.
syntax: glob
*.elc
*.pyc
*~
# switch to regexp syntax.
syntax: regexp
^\.pc/

Available merge tools¶

External merge tools and their properties are configured in the merge-tools configuration section - see hgrc(5) - but they can often just be named by their executable.

A merge tool is generally usable if its executable can be found on the system and if it can handle the merge. The executable is found if it is an absolute or relative executable path or the name of an application in the executable search path. The tool is assumed to be able to handle the merge if it can handle symlinks if the file is a symlink, if it can handle binary files if the file is binary, and if a GUI is available if the tool requires a GUI.

There are some internal merge tools which can be used. The internal merge tools are:

Internal tools are always available and do not require a GUI but will by default not handle symlinks or binary files.

Choosing a merge tool¶

Mercurial uses these rules when deciding which merge tool to use:

Note

After selecting a merge program, Mercurial will by default attempt to merge the files using a simple merge algorithm first. Only if it doesn't succeed because of conflicting changes Mercurial will actually execute the merge program. Whether to use the simple merge algorithm first can be controlled by the premerge setting of the merge tool. Premerge is enabled by default unless the file is binary or a symlink.

See the merge-tools and ui sections of hgrc(5) for details on the configuration of merge tools.

What are phases?¶

Phases are a system for tracking which changesets have been or should be shared. This helps prevent common mistakes when modifying history (for instance, with the mq or rebase extensions).

Each changeset in a repository is in one of the following phases:

These phases are ordered (public < draft < secret) and no changeset can be in a lower phase than its ancestors. For instance, if a changeset is public, all its ancestors are also public. Lastly, changeset phases should only be changed towards the public phase.

How are phases managed?¶

For the most part, phases should work transparently. By default, a changeset is created in the draft phase and is moved into the public phase when it is pushed to another repository.

Once changesets become public, extensions like mq and rebase will refuse to operate on them to prevent creating duplicate changesets. Phases can also be manually manipulated with the hg phase command if needed. See hg help -v phase for examples.

Phases and servers¶

Normally, all servers are publishing by default. This means:

- all draft changesets that are pulled or cloned appear in phase
public on the client
- all draft changesets that are pushed appear as public on both
client and server
- secret changesets are neither pushed, pulled, or cloned

Note

Pulling a draft changeset from a publishing server does not mark it as public on the server side due to the read-only nature of pull.

Sometimes it may be desirable to push and pull changesets in the draft phase to share unfinished work. This can be done by setting a repository to disable publishing in its configuration file:

[phases]
publish = False

See hg help config for more information on config files.

Note

Servers running older versions of Mercurial are treated as publishing.

Examples¶

See hg help phase for more information on manually manipulating phases.

Adding a Subrepository¶

If .hgsub does not exist, create it and add it to the parent repository. Clone or checkout the external projects where you want it to live in the parent repository. Edit .hgsub and add the subrepository entry as described above. At this point, the subrepository is tracked and the next commit will record its state in .hgsubstate and bind it to the committed changeset.

Synchronizing a Subrepository¶

Subrepos do not automatically track the latest changeset of their sources. Instead, they are updated to the changeset that corresponds with the changeset checked out in the top-level changeset. This is so developers always get a consistent set of compatible code and libraries when they update.

Thus, updating subrepos is a manual process. Simply check out target subrepo at the desired revision, test in the top-level repo, then commit in the parent repository to record the new combination.

Deleting a Subrepository¶

To remove a subrepository from the parent repository, delete its reference from .hgsub, then remove its files.

Interaction with Mercurial Commands¶

Remapping Subrepositories Sources¶

A subrepository source location may change during a project life, invalidating references stored in the parent repository history. To fix this, rewriting rules can be defined in parent repository hgrc file or in Mercurial configuration. See the [subpaths] section in hgrc(5) for more details.

acl¶

hooks for controlling repository access

This hook makes it possible to allow or deny write access to given branches and paths of a repository when receiving incoming changesets via pretxnchangegroup and pretxncommit.

The authorization is matched based on the local user name on the system where the hook runs, and not the committer of the original changeset (since the latter is merely informative).

The acl hook is best used along with a restricted shell like hgsh, preventing authenticating users from doing anything other than pushing or pulling. The hook is not safe to use if users have interactive shell access, as they can then disable the hook. Nor is it safe if remote users share an account, because then there is no way to distinguish them.

The order in which access checks are performed is:

The allow and deny sections take key-value pairs.

Branch-based Access Control¶

Use the acl.deny.branches and acl.allow.branches sections to have branch-based access control. Keys in these sections can be either:

The corresponding values can be either:

You can add the "!" prefix to a user or group name to invert the sense of the match.

Path-based Access Control¶

Use the acl.deny and acl.allow sections to have path-based access control. Keys in these sections accept a subtree pattern (with a glob syntax by default). The corresponding values follow the same syntax as the other sections above.

Groups¶

Group names must be prefixed with an @ symbol. Specifying a group name has the same effect as specifying all the users in that group.

You can define group members in the acl.groups section. If a group name is not defined there, and Mercurial is running under a Unix-like system, the list of users will be taken from the OS. Otherwise, an exception will be raised.

Example Configuration¶

[hooks]
# Use this if you want to check access restrictions at commit time
pretxncommit.acl = python:hgext.acl.hook
# Use this if you want to check access restrictions for pull, push,
# bundle and serve.
pretxnchangegroup.acl = python:hgext.acl.hook
[acl]
# Allow or deny access for incoming changes only if their source is
# listed here, let them pass otherwise. Source is "serve" for all
# remote access (http or ssh), "push", "pull" or "bundle" when the
# related commands are run locally.
# Default: serve
sources = serve
[acl.deny.branches]
# Everyone is denied to the frozen branch:
frozen-branch = *
# A bad user is denied on all branches:
* = bad-user
[acl.allow.branches]
# A few users are allowed on branch-a:
branch-a = user-1, user-2, user-3
# Only one user is allowed on branch-b:
branch-b = user-1
# The super user is allowed on any branch:
* = super-user
# Everyone is allowed on branch-for-tests:
branch-for-tests = *
[acl.deny]
# This list is checked first. If a match is found, acl.allow is not
# checked. All users are granted access if acl.deny is not present.
# Format for both lists: glob pattern = user, ..., @group, ...
# To match everyone, use an asterisk for the user:
# my/glob/pattern = *
# user6 will not have write access to any file:
** = user6
# Group "hg-denied" will not have write access to any file:
** = @hg-denied
# Nobody will be able to change "DONT-TOUCH-THIS.txt", despite
# everyone being able to change all other files. See below.
src/main/resources/DONT-TOUCH-THIS.txt = *
[acl.allow]
# if acl.allow is not present, all users are allowed by default
# empty acl.allow = no users allowed
# User "doc_writer" has write access to any file under the "docs"
# folder:
docs/** = doc_writer
# User "jack" and group "designers" have write access to any file
# under the "images" folder:
images/** = jack, @designers
# Everyone (except for "user6" and "@hg-denied" - see acl.deny above)
# will have write access to any file under the "resources" folder
# (except for 1 file. See acl.deny):
src/main/resources/** = *
.hgtags = release_engineer

Examples using the ! prefix¶

Suppose there's a branch that only a given user (or group) should be able to push to, and you don't want to restrict access to any other branch that may be created.

The "!" prefix allows you to prevent anyone except a given user or group to push changesets in a given branch or path.

In the examples below, we will: 1) Deny access to branch "ring" to anyone but user "gollum" 2) Deny access to branch "lake" to anyone but members of the group "hobbit" 3) Deny access to a file to anyone but user "gollum"

[acl.allow.branches]
# Empty
[acl.deny.branches]
# 1) only 'gollum' can commit to branch 'ring';
# 'gollum' and anyone else can still commit to any other branch.
ring = !gollum
# 2) only members of the group 'hobbit' can commit to branch 'lake';
# 'hobbit' members and anyone else can still commit to any other branch.
lake = !@hobbit
# You can also deny access based on file paths:
[acl.allow]
# Empty
[acl.deny]
# 3) only 'gollum' can change the file below;
# 'gollum' and anyone else can still change any other file.
/misty/mountains/cave/ring = !gollum

blackbox¶

log repository events to a blackbox for debugging

Logs event information to .hg/blackbox.log to help debug and diagnose problems. The events that get logged can be configured via the blackbox.track config key. Examples:

[blackbox]
track = *
[blackbox]
track = command, commandfinish, commandexception, exthook, pythonhook
[blackbox]
track = incoming
[blackbox]
# limit the size of a log file
maxsize = 1.5 MB
# rotate up to N log files when the current one gets too big
maxfiles = 3

Commands¶

blackbox¶

hg blackbox [OPTION]...

view the recent repository events

Options:

bugzilla¶

hooks for integrating with the Bugzilla bug tracker

This hook extension adds comments on bugs in Bugzilla when changesets that refer to bugs by Bugzilla ID are seen. The comment is formatted using the Mercurial template mechanism.

The bug references can optionally include an update for Bugzilla of the hours spent working on the bug. Bugs can also be marked fixed.

Three basic modes of access to Bugzilla are provided:

Writing directly to the database is susceptible to schema changes, and relies on a Bugzilla contrib script to send out bug change notification emails. This script runs as the user running Mercurial, must be run on the host with the Bugzilla install, and requires permission to read Bugzilla configuration details and the necessary MySQL user and password to have full access rights to the Bugzilla database. For these reasons this access mode is now considered deprecated, and will not be updated for new Bugzilla versions going forward. Only adding comments is supported in this access mode.

Access via XMLRPC needs a Bugzilla username and password to be specified in the configuration. Comments are added under that username. Since the configuration must be readable by all Mercurial users, it is recommended that the rights of that user are restricted in Bugzilla to the minimum necessary to add comments. Marking bugs fixed requires Bugzilla 4.0 and later.

Access via XMLRPC/email uses XMLRPC to query Bugzilla, but sends email to the Bugzilla email interface to submit comments to bugs. The From: address in the email is set to the email address of the Mercurial user, so the comment appears to come from the Mercurial user. In the event that the Mercurial user email is not recognized by Bugzilla as a Bugzilla user, the email associated with the Bugzilla username used to log into Bugzilla is used instead as the source of the comment. Marking bugs fixed works on all supported Bugzilla versions.

Configuration items common to all access modes:

Configuration items common to XMLRPC+email and MySQL access modes:

The [usermap] section is used to specify mappings of Mercurial committer email to Bugzilla user email. See also bugzilla.usermap. Contains entries of the form committer = Bugzilla user.

XMLRPC access mode configuration:

XMLRPC+email access mode uses the XMLRPC access mode configuration items, and also:

In addition, the Mercurial email settings must be configured. See the documentation in hgrc(5), sections [email] and [smtp].

MySQL access mode configuration:

Activating the extension:

[extensions]
bugzilla =
[hooks]
# run bugzilla hook on every change pulled or pushed in here
incoming.bugzilla = python:hgext.bugzilla.hook

Example configurations:

XMLRPC example configuration. This uses the Bugzilla at http://my-project.org/bugzilla, logging in as user bugmail@my-project.org with password plugh. It is used with a collection of Mercurial repositories in /var/local/hg/repos/, with a web interface at http://my-project.org/hg.

[bugzilla]
bzurl=http://my-project.org/bugzilla
user=bugmail@my-project.org
password=plugh
version=xmlrpc
template=Changeset {node|short} in {root|basename}.


         {hgweb}/{webroot}/rev/{node|short}\n


         {desc}\n
strip=5
[web]
baseurl=http://my-project.org/hg

XMLRPC+email example configuration. This uses the Bugzilla at http://my-project.org/bugzilla, logging in as user bugmail@my-project.org with password plugh. It is used with a collection of Mercurial repositories in /var/local/hg/repos/, with a web interface at http://my-project.org/hg. Bug comments are sent to the Bugzilla email address bugzilla@my-project.org.

[bugzilla]
bzurl=http://my-project.org/bugzilla
user=bugmail@my-project.org
password=plugh
version=xmlrpc
bzemail=bugzilla@my-project.org
template=Changeset {node|short} in {root|basename}.


         {hgweb}/{webroot}/rev/{node|short}\n


         {desc}\n
strip=5
[web]
baseurl=http://my-project.org/hg
[usermap]
user@emaildomain.com=user.name@bugzilladomain.com

MySQL example configuration. This has a local Bugzilla 3.2 installation in /opt/bugzilla-3.2. The MySQL database is on localhost, the Bugzilla database name is bugs and MySQL is accessed with MySQL username bugs password XYZZY. It is used with a collection of Mercurial repositories in /var/local/hg/repos/, with a web interface at http://my-project.org/hg.

[bugzilla]
host=localhost
password=XYZZY
version=3.0
bzuser=unknown@domain.com
bzdir=/opt/bugzilla-3.2
template=Changeset {node|short} in {root|basename}.


         {hgweb}/{webroot}/rev/{node|short}\n


         {desc}\n
strip=5
[web]
baseurl=http://my-project.org/hg
[usermap]
user@emaildomain.com=user.name@bugzilladomain.com

All the above add a comment to the Bugzilla bug record of the form:

Changeset 3b16791d6642 in repository-name.
http://my-project.org/hg/repository-name/rev/3b16791d6642
Changeset commit comment. Bug 1234.

children¶

command to display child changesets (DEPRECATED)

This extension is deprecated. You should use hg log -r "children(REV)" instead.

Commands¶

children¶

hg children [-r REV] [FILE]

Print the children of the working directory's revisions. If a revision is given via -r/--rev, the children of that revision will be printed. If a file argument is given, revision in which the file was last changed (after the working directory revision or the argument to --rev if given) is printed.

Options:

churn¶

command to display statistics about repository history

Commands¶

churn¶

hg churn [-d DATE] [-r REV] [--aliases FILE] [FILE]

This command will display a histogram representing the number of changed lines or revisions, grouped according to the given template. The default template will group changes by author. The --dateformat option may be used to group the results by date instead.

Statistics are based on the number of changed lines, or alternatively the number of matching revisions if the --changesets option is specified.

Examples:

# display count of changed lines for every committer
hg churn -t '{author|email}'
# display daily activity graph
hg churn -f '%H' -s -c
# display activity of developers by month
hg churn -f '%Y-%m' -s -c
# display count of lines changed in every year
hg churn -f '%Y' -s

It is possible to map alternate email addresses to a main address by providing a file using the following format:

<alias email> = <actual email>

Such a file may be specified with the --aliases option, otherwise a .hgchurn file will be looked for in the working directory root.

Options:

color¶

colorize output from some commands

This extension modifies the status and resolve commands to add color to their output to reflect file status, the qseries command to add color to reflect patch status (applied, unapplied, missing), and to diff-related commands to highlight additions, removals, diff headers, and trailing whitespace.

Other effects in addition to color, like bold and underlined text, are also available. By default, the terminfo database is used to find the terminal codes used to change color and effect. If terminfo is not available, then effects are rendered with the ECMA-48 SGR control function (aka ANSI escape codes).

Default effects may be overridden from your configuration file:

[color]
status.modified = blue bold underline red_background
status.added = green bold
status.removed = red bold blue_background
status.deleted = cyan bold underline
status.unknown = magenta bold underline
status.ignored = black bold
# 'none' turns off all effects
status.clean = none
status.copied = none
qseries.applied = blue bold underline
qseries.unapplied = black bold
qseries.missing = red bold
diff.diffline = bold
diff.extended = cyan bold
diff.file_a = red bold
diff.file_b = green bold
diff.hunk = magenta
diff.deleted = red
diff.inserted = green
diff.changed = white
diff.trailingwhitespace = bold red_background
resolve.unresolved = red bold
resolve.resolved = green bold
bookmarks.current = green
branches.active = none
branches.closed = black bold
branches.current = green
branches.inactive = none
tags.normal = green
tags.local = black bold

The available effects in terminfo mode are 'blink', 'bold', 'dim', 'inverse', 'invisible', 'italic', 'standout', and 'underline'; in ECMA-48 mode, the options are 'bold', 'inverse', 'italic', and 'underline'. How each is rendered depends on the terminal emulator. Some may not be available for a given terminal type, and will be silently ignored.

Note that on some systems, terminfo mode may cause problems when using color with the pager extension and less -R. less with the -R option will only display ECMA-48 color codes, and terminfo mode may sometimes emit codes that less doesn't understand. You can work around this by either using ansi mode (or auto mode), or by using less -r (which will pass through all terminal control codes, not just color control codes).

Because there are only eight standard colors, this module allows you to define color names for other color slots which might be available for your terminal type, assuming terminfo mode. For instance:

color.brightblue = 12
color.pink = 207
color.orange = 202

to set 'brightblue' to color slot 12 (useful for 16 color terminals that have brighter colors defined in the upper eight) and, 'pink' and 'orange' to colors in 256-color xterm's default color cube. These defined colors may then be used as any of the pre-defined eight, including appending '_background' to set the background to that color.

By default, the color extension will use ANSI mode (or win32 mode on Windows) if it detects a terminal. To override auto mode (to enable terminfo mode, for example), set the following configuration option:

[color]
mode = terminfo

Any value other than 'ansi', 'win32', 'terminfo', or 'auto' will disable color.

convert¶

import revisions from foreign VCS repositories into Mercurial

Commands¶

convert¶

hg convert [OPTION]... SOURCE [DEST [REVMAP]]

Accepted source formats [identifiers]:

Accepted destination formats [identifiers]:

If no revision is given, all revisions will be converted. Otherwise, convert will only import up to the named revision (given in a format understood by the source).

If no destination directory name is specified, it defaults to the basename of the source with -hg appended. If the destination repository doesn't exist, it will be created.

By default, all sources except Mercurial will use --branchsort. Mercurial uses --sourcesort to preserve original revision numbers order. Sort modes have the following effects:

If REVMAP isn't given, it will be put in a default location (<dest>/.hg/shamap by default). The REVMAP is a simple text file that maps each source commit ID to the destination ID for that revision, like so:

<source ID> <destination ID>

If the file doesn't exist, it's automatically created. It's updated on each commit copied, so hg convert can be interrupted and can be run repeatedly to copy new commits.

The authormap is a simple text file that maps each source commit author to a destination commit author. It is handy for source SCMs that use unix logins to identify authors (e.g.: CVS). One line per author mapping and the line format is:

source author = destination author

Empty lines and lines starting with a # are ignored.

The filemap is a file that allows filtering and remapping of files and directories. Each line can contain one of the following directives:

include path/to/file-or-dir
exclude path/to/file-or-dir
rename path/to/source path/to/destination

Comment lines start with #. A specified path matches if it equals the full relative name of a file or one of its parent directories. The include or exclude directive with the longest matching path applies, so line order does not matter.

The include directive causes a file, or all files under a directory, to be included in the destination repository, and the exclusion of all other files and directories not explicitly included. The exclude directive causes files or directories to be omitted. The rename directive renames a file or directory if it is converted. To rename from a subdirectory into the root of the repository, use . as the path to rename to.

The splicemap is a file that allows insertion of synthetic history, letting you specify the parents of a revision. This is useful if you want to e.g. give a Subversion merge two parents, or graft two disconnected series of history together. Each entry contains a key, followed by a space, followed by one or two comma-separated values:

key parent1, parent2

The key is the revision ID in the source revision control system whose parents should be modified (same format as a key in .hg/shamap). The values are the revision IDs (in either the source or destination revision control system) that should be used as the new parents for that node. For example, if you have merged "release-1.0" into "trunk", then you should specify the revision on "trunk" as the first parent and the one on the "release-1.0" branch as the second.

The branchmap is a file that allows you to rename a branch when it is being brought in from whatever external repository. When used in conjunction with a splicemap, it allows for a powerful combination to help fix even the most badly mismanaged repositories and turn them into nicely structured Mercurial repositories. The branchmap contains lines of the form:

original_branch_name new_branch_name

where "original_branch_name" is the name of the branch in the source repository, and "new_branch_name" is the name of the branch is the destination repository. No whitespace is allowed in the branch names. This can be used to (for instance) move code in one repository from "default" to a named branch.

Mercurial Source¶

The Mercurial source recognizes the following configuration options, which you can set on the command line with --config:

CVS Source¶

CVS source will use a sandbox (i.e. a checked-out copy) from CVS to indicate the starting point of what will be converted. Direct access to the repository files is not needed, unless of course the repository is :local:. The conversion uses the top level directory in the sandbox to find the CVS repository, and then uses CVS rlog commands to find files to convert. This means that unless a filemap is given, all files under the starting directory will be converted, and that any directory reorganization in the CVS sandbox is ignored.

The following options can be used with --config:

An additional "debugcvsps" Mercurial command allows the builtin changeset merging code to be run without doing a conversion. Its parameters and output are similar to that of cvsps 2.1. Please see the command help for more details.

Subversion Source¶

Subversion source detects classical trunk/branches/tags layouts. By default, the supplied svn://repo/path/ source URL is converted as a single branch. If svn://repo/path/trunk exists it replaces the default branch. If svn://repo/path/branches exists, its subdirectories are listed as possible branches. If svn://repo/path/tags exists, it is looked for tags referencing converted branches. Default trunk, branches and tags values can be overridden with following options. Set them to paths relative to the source URL, or leave them blank to disable auto detection.

The following options can be set with --config:

Source history can be retrieved starting at a specific revision, instead of being integrally converted. Only single branch conversions are supported.

Perforce Source¶

The Perforce (P4) importer can be given a p4 depot path or a client specification as source. It will convert all files in the source to a flat Mercurial repository, ignoring labels, branches and integrations. Note that when a depot path is given you then usually should specify a target directory, because otherwise the target may be named ...-hg.

It is possible to limit the amount of source history to be converted by specifying an initial Perforce revision:

Mercurial Destination¶

The following options are supported:

Options:

eol¶

automatically manage newlines in repository files

This extension allows you to manage the type of line endings (CRLF or LF) that are used in the repository and in the local working directory. That way you can get CRLF line endings on Windows and LF on Unix/Mac, thereby letting everybody use their OS native line endings.

The extension reads its configuration from a versioned .hgeol configuration file found in the root of the working copy. The .hgeol file use the same syntax as all other Mercurial configuration files. It uses two sections, [patterns] and [repository].

The [patterns] section specifies how line endings should be converted between the working copy and the repository. The format is specified by a file pattern. The first match is used, so put more specific patterns first. The available line endings are LF, CRLF, and BIN.

Files with the declared format of CRLF or LF are always checked out and stored in the repository in that format and files declared to be binary (BIN) are left unchanged. Additionally, native is an alias for checking out in the platform's default line ending: LF on Unix (including Mac OS X) and CRLF on Windows. Note that BIN (do nothing to line endings) is Mercurial's default behaviour; it is only needed if you need to override a later, more general pattern.

The optional [repository] section specifies the line endings to use for files stored in the repository. It has a single setting, native, which determines the storage line endings for files declared as native in the [patterns] section. It can be set to LF or CRLF. The default is LF. For example, this means that on Windows, files configured as native (CRLF by default) will be converted to LF when stored in the repository. Files declared as LF, CRLF, or BIN in the [patterns] section are always stored as-is in the repository.

Example versioned .hgeol file:

[patterns]
**.py = native
**.vcproj = CRLF
**.txt = native
Makefile = LF
**.jpg = BIN
[repository]
native = LF

Note

The rules will first apply when files are touched in the working copy, e.g. by updating to null and back to tip to touch all files.

The extension uses an optional [eol] section read from both the normal Mercurial configuration files and the .hgeol file, with the latter overriding the former. You can use that section to control the overall behavior. There are three settings:

The extension provides cleverencode: and cleverdecode: filters like the deprecated win32text extension does. This means that you can disable win32text and enable eol and your filters will still work. You only need to these filters until you have prepared a .hgeol file.

The win32text.forbid* hooks provided by the win32text extension have been unified into a single hook named eol.checkheadshook. The hook will lookup the expected line endings from the .hgeol file, which means you must migrate to a .hgeol file first before using the hook. eol.checkheadshook only checks heads, intermediate invalid revisions will be pushed. To forbid them completely, use the eol.checkallhook hook. These hooks are best used as pretxnchangegroup hooks.

See hg help patterns for more information about the glob patterns used.

extdiff¶

command to allow external programs to compare revisions

The extdiff Mercurial extension allows you to use external programs to compare revisions, or revision with working directory. The external diff programs are called with a configurable set of options and two non-option arguments: paths to directories containing snapshots of files to compare.

The extdiff extension also allows you to configure new diff commands, so you do not need to type hg extdiff -p kdiff3 always.

[extdiff]
# add new command that runs GNU diff(1) in 'context diff' mode
cdiff = gdiff -Nprc5
## or the old way:
#cmd.cdiff = gdiff
#opts.cdiff = -Nprc5
# add new command called vdiff, runs kdiff3
vdiff = kdiff3
# add new command called meld, runs meld (no need to name twice)
meld =
# add new command called vimdiff, runs gvimdiff with DirDiff plugin
# (see http://www.vim.org/scripts/script.php?script_id=102) Non
# English user, be sure to put "let g:DirDiffDynamicDiffText = 1" in
# your .vimrc
vimdiff = gvim -f "+next" \


          "+execute 'DirDiff' fnameescape(argv(0)) fnameescape(argv(1))"

Tool arguments can include variables that are expanded at runtime:

$parent1, $plabel1 - filename, descriptive label of first parent
$child,   $clabel  - filename, descriptive label of child revision
$parent2, $plabel2 - filename, descriptive label of second parent
$root              - repository root
$parent is an alias for $parent1.

The extdiff extension will look in your [diff-tools] and [merge-tools] sections for diff tool arguments, when none are specified in [extdiff].

[extdiff]
kdiff3 =
[diff-tools]
kdiff3.diffargs=--L1 '$plabel1' --L2 '$clabel' $parent $child

You can use -I/-X and list of file or directory names like normal hg diff command. The extdiff extension makes snapshots of only needed files, so running the external diff program will actually be pretty fast (at least faster than having to compare the entire tree).

Commands¶

extdiff¶

hg extdiff [OPT]... [FILE]...

Show differences between revisions for the specified files, using an external program. The default program used is diff, with default options "-Npru".

To select a different program, use the -p/--program option. The program will be passed the names of two directories to compare. To pass additional options to the program, use -o/--option. These will be passed before the names of the directories to compare.

When two revision arguments are given, then changes are shown between those revisions. If only one revision is specified then that revision is compared to the working directory, and, when no revisions are specified, the working directory files are compared to its parent.

Options:

factotum¶

http authentication with factotum

This extension allows the factotum(4) facility on Plan 9 from Bell Labs platforms to provide authentication information for HTTP access. Configuration entries specified in the auth section as well as authentication information provided in the repository URL are fully supported. If no prefix is specified, a value of "*" will be assumed.

By default, keys are specified as:

proto=pass service=hg prefix=<prefix> user=<username> !password=<password>

If the factotum extension is unable to read the required key, one will be requested interactively.

A configuration section is available to customize runtime behavior. By default, these entries are:

[factotum]
executable = /bin/auth/factotum
mountpoint = /mnt/factotum
service = hg

The executable entry defines the full path to the factotum binary. The mountpoint entry defines the path to the factotum file service. Lastly, the service entry controls the service name used when reading keys.

fetch¶

pull, update and merge in one command (DEPRECATED)

Commands¶

fetch¶

hg fetch [SOURCE]

This finds all changes from the repository at the specified path or URL and adds them to the local repository.

If the pulled changes add a new branch head, the head is automatically merged, and the result of the merge is committed. Otherwise, the working directory is updated to include the new changes.

When a merge is needed, the working directory is first updated to the newly pulled changes. Local changes are then merged into the pulled changes. To switch the merge order, use --switch-parent.

See hg help dates for a list of formats valid for -d/--date.

Returns 0 on success.

Options:

gpg¶

commands to sign and verify changesets

Commands¶

sigcheck¶

hg sigcheck REV

verify all the signatures there may be for a particular revision

sign¶

hg sign [OPTION]... [REV]...

If no revision is given, the parent of the working directory is used, or tip if no revision is checked out.

See hg help dates for a list of formats valid for -d/--date.

Options:

sigs¶

hg sigs

list signed changesets

graphlog¶

command to view revision graphs from a shell

This extension adds a --graph option to the incoming, outgoing and log commands. When this options is given, an ASCII representation of the revision graph is also shown.

Commands¶

glog¶

hg glog [OPTION]... [FILE]

Print a revision history alongside a revision graph drawn with ASCII characters.

Nodes printed as an @ character are parents of the working directory.

Options:

hgcia¶

hooks for integrating with the CIA.vc notification service

This is meant to be run as a changegroup or incoming hook. To configure it, set the following options in your hgrc:

[cia]
# your registered CIA user name
user = foo
# the name of the project in CIA
project = foo
# the module (subproject) (optional)
#module = foo
# Append a diffstat to the log message (optional)
#diffstat = False
# Template to use for log messages (optional)
#template = {desc}\n{baseurl}{webroot}/rev/{node}-- {diffstat}
# Style to use (optional)
#style = foo
# The URL of the CIA notification service (optional)
# You can use mailto: URLs to send by email, e.g.
# mailto:cia@cia.vc
# Make sure to set email.from if you do this.
#url = http://cia.vc/
# print message instead of sending it (optional)
#test = False
# number of slashes to strip for url paths
#strip = 0
[hooks]
# one of these:
changegroup.cia = python:hgcia.hook
#incoming.cia = python:hgcia.hook
[web]
# If you want hyperlinks (optional)
baseurl = http://server/path/to/repo

hgk¶

browse the repository in a graphical way

The hgk extension allows browsing the history of a repository in a graphical way. It requires Tcl/Tk version 8.4 or later. (Tcl/Tk is not distributed with Mercurial.)

hgk consists of two parts: a Tcl script that does the displaying and querying of information, and an extension to Mercurial named hgk.py, which provides hooks for hgk to get information. hgk can be found in the contrib directory, and the extension is shipped in the hgext repository, and needs to be enabled.

The hg view command will launch the hgk Tcl script. For this command to work, hgk must be in your search path. Alternately, you can specify the path to hgk in your configuration file:

[hgk]
path=/location/of/hgk

hgk can make use of the extdiff extension to visualize revisions. Assuming you had already configured extdiff vdiff command, just add:

[hgk]
vdiff=vdiff

Revisions context menu will now display additional entries to fire vdiff on hovered and selected revisions.

Commands¶

view¶

hg view [-l LIMIT] [REVRANGE]

start interactive history viewer

Options:

highlight¶

syntax highlighting for hgweb (requires Pygments)

It depends on the Pygments syntax highlighting library: http://pygments.org/

There is a single configuration option:

[web]
pygments_style = <style>

The default is 'colorful'.

histedit¶

interactive history editing

With this extension installed, Mercurial gains one new command: histedit. Usage is as follows, assuming the following history:

@  3[tip]   7c2fd3b9020c   2009-04-27 18:04 -0500   durin42
|    Add delta
|
o  2   030b686bedc4   2009-04-27 18:04 -0500   durin42
|    Add gamma
|
o  1   c561b4e977df   2009-04-27 18:04 -0500   durin42
|    Add beta
|
o  0   d8d2fcd0e319   2009-04-27 18:04 -0500   durin42


     Add alpha

If you were to run hg histedit c561b4e977df, you would see the following file open in your editor:

pick c561b4e977df Add beta
pick 030b686bedc4 Add gamma
pick 7c2fd3b9020c Add delta
# Edit history between c561b4e977df and 7c2fd3b9020c
#
# Commands:
#  p, pick = use commit
#  e, edit = use commit, but stop for amending
#  f, fold = use commit, but fold into previous commit (combines N and N-1)
#  d, drop = remove commit from history
#  m, mess = edit message without changing commit content
#

In this file, lines beginning with # are ignored. You must specify a rule for each revision in your history. For example, if you had meant to add gamma before beta, and then wanted to add delta in the same revision as beta, you would reorganize the file to look like this:

pick 030b686bedc4 Add gamma
pick c561b4e977df Add beta
fold 7c2fd3b9020c Add delta
# Edit history between c561b4e977df and 7c2fd3b9020c
#
# Commands:
#  p, pick = use commit
#  e, edit = use commit, but stop for amending
#  f, fold = use commit, but fold into previous commit (combines N and N-1)
#  d, drop = remove commit from history
#  m, mess = edit message without changing commit content
#

At which point you close the editor and histedit starts working. When you specify a fold operation, histedit will open an editor when it folds those revisions together, offering you a chance to clean up the commit message:

Add beta
***
Add delta

Edit the commit message to your liking, then close the editor. For this example, let's assume that the commit message was changed to Add beta and delta. After histedit has run and had a chance to remove any old or temporary revisions it needed, the history looks like this:

@  2[tip]   989b4d060121   2009-04-27 18:04 -0500   durin42
|    Add beta and delta.
|
o  1   081603921c3f   2009-04-27 18:04 -0500   durin42
|    Add gamma
|
o  0   d8d2fcd0e319   2009-04-27 18:04 -0500   durin42


     Add alpha

Note that histedit does not remove any revisions (even its own temporary ones) until after it has completed all the editing operations, so it will probably perform several strip operations when it's done. For the above example, it had to run strip twice. Strip can be slow depending on a variety of factors, so you might need to be a little patient. You can choose to keep the original revisions by passing the --keep flag.

The edit operation will drop you back to a command prompt, allowing you to edit files freely, or even use hg record to commit some changes as a separate commit. When you're done, any remaining uncommitted changes will be committed as well. When done, run hg histedit --continue to finish this step. You'll be prompted for a new commit message, but the default commit message will be the original message for the edit ed revision.

The message operation will give you a chance to revise a commit message without changing the contents. It's a shortcut for doing edit immediately followed by hg histedit --continue`.

If histedit encounters a conflict when moving a revision (while handling pick or fold), it'll stop in a similar manner to edit with the difference that it won't prompt you for a commit message when done. If you decide at this point that you don't like how much work it will be to rearrange history, or that you made a mistake, you can use hg histedit --abort to abandon the new changes you have made and return to the state before you attempted to edit your history.

If we clone the histedit-ed example repository above and add four more changes, such that we have the following history:

@  6[tip]   038383181893   2009-04-27 18:04 -0500   stefan
|    Add theta
|
o  5   140988835471   2009-04-27 18:04 -0500   stefan
|    Add eta
|
o  4   122930637314   2009-04-27 18:04 -0500   stefan
|    Add zeta
|
o  3   836302820282   2009-04-27 18:04 -0500   stefan
|    Add epsilon
|
o  2   989b4d060121   2009-04-27 18:04 -0500   durin42
|    Add beta and delta.
|
o  1   081603921c3f   2009-04-27 18:04 -0500   durin42
|    Add gamma
|
o  0   d8d2fcd0e319   2009-04-27 18:04 -0500   durin42


     Add alpha

If you run hg histedit --outgoing on the clone then it is the same as running hg histedit 836302820282. If you need plan to push to a repository that Mercurial does not detect to be related to the source repo, you can add a --force option.

Commands¶

histedit¶

hg histedit [PARENT]

interactively edit changeset history

Options:

inotify¶

accelerate status report using Linux's inotify service

Commands¶

inserve¶

hg inserve [OPTION]...

start an inotify server for this repository

Options:

interhg¶

None

keyword¶

expand keywords in tracked files

This extension expands RCS/CVS-like or self-customized $Keywords$ in tracked text files selected by your configuration.

Keywords are only expanded in local repositories and not stored in the change history. The mechanism can be regarded as a convenience for the current user or for archive distribution.

Keywords expand to the changeset data pertaining to the latest change relative to the working directory parent of each file.

Configuration is done in the [keyword], [keywordset] and [keywordmaps] sections of hgrc files.

Example:

[keyword]
# expand keywords in every python file except those matching "x*"
**.py =
x*    = ignore
[keywordset]
# prefer svn- over cvs-like default keywordmaps
svn = True

Note

The more specific you are in your filename patterns the less you lose speed in huge repositories.

For [keywordmaps] template mapping and expansion demonstration and control run hg kwdemo. See hg help templates for a list of available templates and filters.

Three additional date template filters are provided:

The default template mappings (view with hg kwdemo -d) can be replaced with customized keywords and templates. Again, run hg kwdemo to control the results of your configuration changes.

Before changing/disabling active keywords, you must run hg kwshrink to avoid storing expanded keywords in the change history.

To force expansion after enabling it, or a configuration change, run hg kwexpand.

Expansions spanning more than one line and incremental expansions, like CVS' $Log$, are not supported. A keyword template map "Log = {desc}" expands to the first line of the changeset description.

Commands¶

kwdemo¶

hg kwdemo [-d] [-f RCFILE] [TEMPLATEMAP]...

Show current, custom, or default keyword template maps and their expansions.

Extend the current configuration by specifying maps as arguments and using -f/--rcfile to source an external hgrc file.

Use -d/--default to disable current configuration.

See hg help templates for information on templates and filters.

Options:

kwexpand¶

hg kwexpand [OPTION]... [FILE]...

Run after (re)enabling keyword expansion.

kwexpand refuses to run if given files contain local changes.

Options:

kwfiles¶

hg kwfiles [OPTION]... [FILE]...

List which files in the working directory are matched by the [keyword] configuration patterns.

Useful to prevent inadvertent keyword expansion and to speed up execution by including only files that are actual candidates for expansion.

See hg help keyword on how to construct patterns both for inclusion and exclusion of files.

With -A/--all and -v/--verbose the codes used to show the status of files are:

K = keyword expansion candidate
k = keyword expansion candidate (not tracked)
I = ignored
i = ignored (not tracked)

Options:

kwshrink¶

hg kwshrink [OPTION]... [FILE]...

Must be run before changing/disabling active keywords.

kwshrink refuses to run if given files contain local changes.

Options:

largefiles¶

track large binary files

Large binary files tend to be not very compressible, not very diffable, and not at all mergeable. Such files are not handled efficiently by Mercurial's storage format (revlog), which is based on compressed binary deltas; storing large binary files as regular Mercurial files wastes bandwidth and disk space and increases Mercurial's memory usage. The largefiles extension addresses these problems by adding a centralized client-server layer on top of Mercurial: largefiles live in a central store out on the network somewhere, and you only fetch the revisions that you need when you need them.

largefiles works by maintaining a "standin file" in .hglf/ for each largefile. The standins are small (41 bytes: an SHA-1 hash plus newline) and are tracked by Mercurial. Largefile revisions are identified by the SHA-1 hash of their contents, which is written to the standin. largefiles uses that revision ID to get/put largefile revisions from/to the central store. This saves both disk space and bandwidth, since you don't need to retrieve all historical revisions of large files when you clone or pull.

To start a new repository or add new large binary files, just add --large to your hg add command. For example:

$ dd if=/dev/urandom of=randomdata count=2000
$ hg add --large randomdata
$ hg commit -m 'add randomdata as a largefile'

When you push a changeset that adds/modifies largefiles to a remote repository, its largefile revisions will be uploaded along with it. Note that the remote Mercurial must also have the largefiles extension enabled for this to work.

When you pull a changeset that affects largefiles from a remote repository, the largefiles for the changeset will by default not be pulled down. However, when you update to such a revision, any largefiles needed by that revision are downloaded and cached (if they have never been downloaded before). One way to pull largefiles when pulling is thus to use --update, which will update your working copy to the latest pulled revision (and thereby downloading any new largefiles).

If you want to pull largefiles you don't need for update yet, then you can use pull with the --lfrev option or the hg lfpull command.

If you know you are pulling from a non-default location and want to download all the largefiles that correspond to the new changesets at the same time, then you can pull with --lfrev "pulled()".

If you just want to ensure that you will have the largefiles needed to merge or rebase with new heads that you are pulling, then you can pull with --lfrev "head(pulled())" flag to pre-emptively download any largefiles that are new in the heads you are pulling.

Keep in mind that network access may now be required to update to changesets that you have not previously updated to. The nature of the largefiles extension means that updating is no longer guaranteed to be a local-only operation.

If you already have large files tracked by Mercurial without the largefiles extension, you will need to convert your repository in order to benefit from largefiles. This is done with the hg lfconvert command:

$ hg lfconvert --size 10 oldrepo newrepo

In repositories that already have largefiles in them, any new file over 10MB will automatically be added as a largefile. To change this threshold, set largefiles.minsize in your Mercurial config file to the minimum size in megabytes to track as a largefile, or use the --lfsize option to the add command (also in megabytes):

[largefiles]
minsize = 2
$ hg add --lfsize 2

The largefiles.patterns config option allows you to specify a list of filename patterns (see hg help patterns) that should always be tracked as largefiles:

[largefiles]
patterns =


  *.jpg


  re:.*\.(png|bmp)$


  library.zip


  content/audio/*

Files that match one of these patterns will be added as largefiles regardless of their size.

The largefiles.minsize and largefiles.patterns config options will be ignored for any repositories not already containing a largefile. To add the first largefile to a repository, you must explicitly do so with the --large flag passed to the hg add command.

Commands¶

lfconvert¶

hg lfconvert SOURCE DEST [FILE ...]

Convert repository SOURCE to a new repository DEST, identical to SOURCE except that certain files will be converted as largefiles: specifically, any file that matches any PATTERN or whose size is above the minimum size threshold is converted as a largefile. The size used to determine whether or not to track a file as a largefile is the size of the first version of the file. The minimum size can be specified either with --size or in configuration as largefiles.size.

After running this command you will need to make sure that largefiles is enabled anywhere you intend to push the new repository.

Use --to-normal to convert largefiles back to normal files; after this, the DEST repository can be used without largefiles at all.

Options:

lfpull¶

hg lfpull -r REV... [-e CMD] [--remotecmd CMD] [SOURCE]

Pull largefiles that are referenced from local changesets but missing locally, pulling from a remote repository to the local cache.

If SOURCE is omitted, the 'default' path will be used. See hg help urls for more information.

Some examples:

Options:

mq¶

manage a stack of patches

This extension lets you work with a stack of patches in a Mercurial repository. It manages two stacks of patches - all known patches, and applied patches (subset of known patches).

Known patches are represented as patch files in the .hg/patches directory. Applied patches are both patch files and changesets.

Common tasks (use hg help command for more details):

create new patch                          qnew
import existing patch                     qimport
print patch series                        qseries
print applied patches                     qapplied
add known patch to applied stack          qpush
remove patch from applied stack           qpop
refresh contents of top applied patch     qrefresh

By default, mq will automatically use git patches when required to avoid losing file mode changes, copy records, binary files or empty files creations or deletions. This behaviour can be configured with:

[mq]
git = auto/keep/yes/no

If set to 'keep', mq will obey the [diff] section configuration while preserving existing git patches upon qrefresh. If set to 'yes' or 'no', mq will override the [diff] section and always generate git or regular patches, possibly losing data in the second case.

It may be desirable for mq changesets to be kept in the secret phase (see hg help phases), which can be enabled with the following setting:

[mq]
secret = True

You will by default be managing a patch queue named "patches". You can create other, independent patch queues with the hg qqueue command.

If the working directory contains uncommitted files, qpush, qpop and qgoto abort immediately. If -f/--force is used, the changes are discarded. Setting:

[mq]
keepchanges = True

make them behave as if --keep-changes were passed, and non-conflicting local changes will be tolerated and preserved. If incompatible options such as -f/--force or --exact are passed, this setting is ignored.

Commands¶

qapplied¶

hg qapplied [-1] [-s] [PATCH]

Returns 0 on success.

Options:

qclone¶

hg qclone [OPTION]... SOURCE [DEST]

If source is local, destination will have no patches applied. If source is remote, this command can not check if patches are applied in source, so cannot guarantee that patches are not applied in destination. If you clone remote repository, be sure before that it has no patches applied.

Source patch repository is looked for in <src>/.hg/patches by default. Use -p <url> to change.

The patch directory must be a nested Mercurial repository, as would be created by hg init --mq.

Return 0 on success.

Options:

qcommit¶

hg qcommit [OPTION]... [FILE]...

This command is deprecated; use hg commit --mq instead.

Options:

qdelete¶

hg qdelete [-k] [PATCH]...

The patches must not be applied, and at least one patch is required. Exact patch identifiers must be given. With -k/--keep, the patch files are preserved in the patch directory.

To stop managing a patch and move it into permanent history, use the hg qfinish command.

Options:

qdiff¶

hg qdiff [OPTION]... [FILE]...

Shows a diff which includes the current patch as well as any changes which have been made in the working directory since the last refresh (thus showing what the current patch would become after a qrefresh).

Use hg diff if you only want to see the changes made since the last qrefresh, or hg export qtip if you want to see changes made by the current patch without including changes made since the qrefresh.

Returns 0 on success.

Options:

qfinish¶

hg qfinish [-a] [REV]...

Finishes the specified revisions (corresponding to applied patches) by moving them out of mq control into regular repository history.

Accepts a revision range or the -a/--applied option. If --applied is specified, all applied mq revisions are removed from mq control. Otherwise, the given revisions must be at the base of the stack of applied patches.

This can be especially useful if your changes have been applied to an upstream repository, or if you are about to push your changes to upstream.

Returns 0 on success.

Options:

qfold¶

hg qfold [-e] [-k] [-m TEXT] [-l FILE] PATCH...

Patches must not yet be applied. Each patch will be successively applied to the current patch in the order given. If all the patches apply successfully, the current patch will be refreshed with the new cumulative patch, and the folded patches will be deleted. With -k/--keep, the folded patch files will not be removed afterwards.

The header for each folded patch will be concatenated with the current patch header, separated by a line of * * *.

Returns 0 on success.

Options:

qgoto¶

hg qgoto [OPTION]... PATCH

Returns 0 on success.

Options:

qguard¶

hg qguard [-l] [-n] [PATCH] [-- [+GUARD]... [-GUARD]...]

Guards control whether a patch can be pushed. A patch with no guards is always pushed. A patch with a positive guard ("+foo") is pushed only if the hg qselect command has activated it. A patch with a negative guard ("-foo") is never pushed if the hg qselect command has activated it.

With no arguments, print the currently active guards. With arguments, set guards for the named patch.

Note

Specifying negative guards now requires '--'.

To set guards on another patch:

hg qguard other.patch -- +2.6.17 -stable

Returns 0 on success.

Options:

qheader¶

hg qheader [PATCH]

Returns 0 on success.

qimport¶

hg qimport [-e] [-n NAME] [-f] [-g] [-P] [-r REV]... [FILE]...

The patch is inserted into the series after the last applied patch. If no patches have been applied, qimport prepends the patch to the series.

The patch will have the same name as its source file unless you give it a new one with -n/--name.

You can register an existing patch inside the patch directory with the -e/--existing flag.

With -f/--force, an existing patch of the same name will be overwritten.

An existing changeset may be placed under mq control with -r/--rev (e.g. qimport --rev tip -n patch will place tip under mq control). With -g/--git, patches imported with --rev will use the git diff format. See the diffs help topic for information on why this is important for preserving rename/copy information and permission changes. Use hg qfinish to remove changesets from mq control.

To import a patch from standard input, pass - as the patch file. When importing from standard input, a patch name must be specified using the --name flag.

To import an existing patch while renaming it:

hg qimport -e existing-patch -n new-name

Returns 0 if import succeeded.

Options:

qinit¶

hg qinit [-c]

The queue repository is unversioned by default. If -c/--create-repo is specified, qinit will create a separate nested repository for patches (qinit -c may also be run later to convert an unversioned patch repository into a versioned one). You can use qcommit to commit changes to this queue repository.

This command is deprecated. Without -c, it's implied by other relevant commands. With -c, use hg init --mq instead.

Options:

qnew¶

hg qnew [-e] [-m TEXT] [-l FILE] PATCH [FILE]...

qnew creates a new patch on top of the currently-applied patch (if any). The patch will be initialized with any outstanding changes in the working directory. You may also use -I/--include, -X/--exclude, and/or a list of files after the patch name to add only changes to matching files to the new patch, leaving the rest as uncommitted modifications.

-u/--user and -d/--date can be used to set the (given) user and date, respectively. -U/--currentuser and -D/--currentdate set user to current user and date to current date.

-e/--edit, -m/--message or -l/--logfile set the patch header as well as the commit message. If none is specified, the header is empty and the commit message is '[mq]: PATCH'.

Use the -g/--git option to keep the patch in the git extended diff format. Read the diffs help topic for more information on why this is important for preserving permission changes and copy/rename information.

Returns 0 on successful creation of a new patch.

Options:

qnext¶

hg qnext [-s]

Returns 0 on success.

Options:

qpop¶

hg qpop [-a] [-f] [PATCH | INDEX]

Without argument, pops off the top of the patch stack. If given a patch name, keeps popping off patches until the named patch is at the top of the stack.

By default, abort if the working directory contains uncommitted changes. With --keep-changes, abort only if the uncommitted files overlap with patched files. With -f/--force, backup and discard changes made to such files.

Return 0 on success.

Options:

qprev¶

hg qprev [-s]

Returns 0 on success.

Options:

qpush¶

hg qpush [-f] [-l] [-a] [--move] [PATCH | INDEX]

By default, abort if the working directory contains uncommitted changes. With --keep-changes, abort only if the uncommitted files overlap with patched files. With -f/--force, backup and patch over uncommitted changes.

Return 0 on success.

Options:

qqueue¶

hg qqueue [OPTION] [QUEUE]

Supports switching between different patch queues, as well as creating new patch queues and deleting existing ones.

Omitting a queue name or specifying -l/--list will show you the registered queues - by default the "normal" patches queue is registered. The currently active queue will be marked with "(active)". Specifying --active will print only the name of the active queue.

To create a new queue, use -c/--create. The queue is automatically made active, except in the case where there are applied patches from the currently active queue in the repository. Then the queue will only be created and switching will fail.

To delete an existing queue, use --delete. You cannot delete the currently active queue.

Returns 0 on success.

Options:

qrefresh¶

hg qrefresh [-I] [-X] [-e] [-m TEXT] [-l FILE] [-s] [FILE]...

If any file patterns are provided, the refreshed patch will contain only the modifications that match those patterns; the remaining modifications will remain in the working directory.

If -s/--short is specified, files currently included in the patch will be refreshed just like matched files and remain in the patch.

If -e/--edit is specified, Mercurial will start your configured editor for you to enter a message. In case qrefresh fails, you will find a backup of your message in .hg/last-message.txt.

hg add/remove/copy/rename work as usual, though you might want to use git-style patches (-g/--git or [diff] git=1) to track copies and renames. See the diffs help topic for more information on the git diff format.

Returns 0 on success.

Options:

qrename¶

hg qrename PATCH1 [PATCH2]

With one argument, renames the current patch to PATCH1. With two arguments, renames PATCH1 to PATCH2.

Returns 0 on success.

qrestore¶

hg qrestore [-d] [-u] REV

This command is deprecated, use hg rebase instead.

Options:

qsave¶

hg qsave [-m TEXT] [-l FILE] [-c] [-n NAME] [-e] [-f]

This command is deprecated, use hg rebase instead.

Options:

qselect¶

hg qselect [OPTION]... [GUARD]...

Use the hg qguard command to set or print guards on patch, then use qselect to tell mq which guards to use. A patch will be pushed if it has no guards or any positive guards match the currently selected guard, but will not be pushed if any negative guards match the current guard. For example:

qguard foo.patch -- -stable    (negative guard)
qguard bar.patch    +stable    (positive guard)
qselect stable

This activates the "stable" guard. mq will skip foo.patch (because it has a negative match) but push bar.patch (because it has a positive match).

With no arguments, prints the currently active guards. With one argument, sets the active guard.

Use -n/--none to deactivate guards (no other arguments needed). When no guards are active, patches with positive guards are skipped and patches with negative guards are pushed.

qselect can change the guards on applied patches. It does not pop guarded patches by default. Use --pop to pop back to the last applied patch that is not guarded. Use --reapply (which implies --pop) to push back to the current patch afterwards, but skip guarded patches.

Use -s/--series to print a list of all guards in the series file (no other arguments needed). Use -v for more information.

Returns 0 on success.

Options:

qseries¶

hg qseries [-ms]

Returns 0 on success.

Options:

qtop¶

hg qtop [-s]

Returns 0 on success.

Options:

qunapplied¶

hg qunapplied [-1] [-s] [PATCH]

Returns 0 on success.

Options:

strip¶

hg strip [-k] [-f] [-n] [-B bookmark] [-r] REV...

The strip command removes the specified changesets and all their descendants. If the working directory has uncommitted changes, the operation is aborted unless the --force flag is supplied, in which case changes will be discarded.

If a parent of the working directory is stripped, then the working directory will automatically be updated to the most recent available ancestor of the stripped parent after the operation completes.

Any stripped changesets are stored in .hg/strip-backup as a bundle (see hg help bundle and hg help unbundle). They can be restored by running hg unbundle .hg/strip-backup/BUNDLE, where BUNDLE is the bundle file created by the strip. Note that the local revision numbers will in general be different after the restore.

Use the --no-backup option to discard the backup bundle once the operation completes.

Strip is not a history-rewriting operation and can be used on changesets in the public phase. But if the stripped changesets have been pushed to a remote repository you will likely pull them again.

Return 0 on success.

Options:

notify¶

hooks for sending email push notifications

This extension implements hooks to send email notifications when changesets are sent from or received by the local repository.

First, enable the extension as explained in hg help extensions, and register the hook you want to run. incoming and changegroup hooks are run when changesets are received, while outgoing hooks are for changesets sent to another repository:

[hooks]
# one email for each incoming changeset
incoming.notify = python:hgext.notify.hook
# one email for all incoming changesets
changegroup.notify = python:hgext.notify.hook
# one email for all outgoing changesets
outgoing.notify = python:hgext.notify.hook

This registers the hooks. To enable notification, subscribers must be assigned to repositories. The [usersubs] section maps multiple repositories to a given recipient. The [reposubs] section maps multiple recipients to a single repository:

[usersubs]
# key is subscriber email, value is a comma-separated list of repo patterns
user@host = pattern
[reposubs]
# key is repo pattern, value is a comma-separated list of subscriber emails
pattern = user@host

A pattern is a glob matching the absolute path to a repository, optionally combined with a revset expression. A revset expression, if present, is separated from the glob by a hash. Example:

[reposubs]
*/widgets#branch(release) = qa-team@example.com

This sends to qa-team@example.com whenever a changeset on the release branch triggers a notification in any repository ending in widgets.

In order to place them under direct user management, [usersubs] and [reposubs] sections may be placed in a separate hgrc file and incorporated by reference:

[notify]
config = /path/to/subscriptionsfile

Notifications will not be sent until the notify.test value is set to False; see below.

Notifications content can be tweaked with the following configuration entries:

If set, the following entries will also be used to customize the notifications:

pager¶

browse command output with an external pager

To set the pager that should be used, set the application variable:

[pager]
pager = less -FRX

If no pager is set, the pager extensions uses the environment variable $PAGER. If neither pager.pager, nor $PAGER is set, no pager is used.

You can disable the pager for certain commands by adding them to the pager.ignore list:

[pager]
ignore = version, help, update

You can also enable the pager only for certain commands using pager.attend. Below is the default list of commands to be paged:

[pager]
attend = annotate, cat, diff, export, glog, log, qdiff

Setting pager.attend to an empty value will cause all commands to be paged.

If pager.attend is present, pager.ignore will be ignored.

To ignore global commands like hg version or hg help, you have to specify them in your user configuration file.

The --pager=... option can also be used to control when the pager is used. Use a boolean value like yes, no, on, off, or use auto for normal behavior.

patchbomb¶

command to send changesets as (a series of) patch emails

The series is started off with a "[PATCH 0 of N]" introduction, which describes the series as a whole.

Each patch email has a Subject line of "[PATCH M of N] ...", using the first line of the changeset description as the subject text. The message contains two or three body parts:

Each message refers to the first in the series using the In-Reply-To and References headers, so they will show up as a sequence in threaded mail and news readers, and in mail archives.

To configure other defaults, add a section like this to your configuration file:

[email]
from = My Name <my@email>
to = recipient1, recipient2, ...
cc = cc1, cc2, ...
bcc = bcc1, bcc2, ...
reply-to = address1, address2, ...

Use [patchbomb] as configuration section name if you need to override global [email] address settings.

Then you can use the hg email command to mail a series of changesets as a patchbomb.

You can also either configure the method option in the email section to be a sendmail compatible mailer or fill out the [smtp] section so that the patchbomb extension can automatically send patchbombs directly from the commandline. See the [email] and [smtp] sections in hgrc(5) for details.

Commands¶

email¶

hg email [OPTION]... [DEST]...

By default, diffs are sent in the format generated by hg export, one per message. The series starts with a "[PATCH 0 of N]" introduction, which describes the series as a whole.

Each patch email has a Subject line of "[PATCH M of N] ...", using the first line of the changeset description as the subject text. The message contains two or three parts. First, the changeset description.

With the -d/--diffstat option, if the diffstat program is installed, the result of running diffstat on the patch is inserted.

Finally, the patch itself, as generated by hg export.

With the -d/--diffstat or --confirm options, you will be presented with a final summary of all messages and asked for confirmation before the messages are sent.

By default the patch is included as text in the email body for easy reviewing. Using the -a/--attach option will instead create an attachment for the patch. With -i/--inline an inline attachment will be created. You can include a patch both as text in the email body and as a regular or an inline attachment by combining the -a/--attach or -i/--inline with the --body option.

With -o/--outgoing, emails will be generated for patches not found in the destination repository (or only those which are ancestors of the specified revisions if any are provided)

With -b/--bundle, changesets are selected as for --outgoing, but a single email containing a binary Mercurial bundle as an attachment will be sent.

With -m/--mbox, instead of previewing each patchbomb message in a pager or sending the messages directly, it will create a UNIX mailbox file with the patch emails. This mailbox file can be previewed with any mail user agent which supports UNIX mbox files.

With -n/--test, all steps will run, but mail will not be sent. You will be prompted for an email recipient address, a subject and an introductory message describing the patches of your patchbomb. Then when all is done, patchbomb messages are displayed. If the PAGER environment variable is set, your pager will be fired up once for each patchbomb message, so you can verify everything is alright.

In case email sending fails, you will find a backup of your series introductory message in .hg/last-email.txt.

Examples:

hg email -r 3000          # send patch 3000 only
hg email -r 3000 -r 3001  # send patches 3000 and 3001
hg email -r 3000:3005     # send patches 3000 through 3005
hg email 3000             # send patch 3000 (deprecated)
hg email -o               # send all patches not in default
hg email -o DEST          # send all patches not in DEST
hg email -o -r 3000       # send all ancestors of 3000 not in default
hg email -o -r 3000 DEST  # send all ancestors of 3000 not in DEST
hg email -b               # send bundle of all patches not in default
hg email -b DEST          # send bundle of all patches not in DEST
hg email -b -r 3000       # bundle of all ancestors of 3000 not in default
hg email -b -r 3000 DEST  # bundle of all ancestors of 3000 not in DEST
hg email -o -m mbox &&    # generate an mbox file...


  mutt -R -f mbox         # ... and view it with mutt
hg email -o -m mbox &&    # generate an mbox file ...


  formail -s sendmail \   # ... and use formail to send from the mbox


    -bm -t < mbox         # ... using sendmail

Before using this command, you will need to enable email in your hgrc. See the [email] section in hgrc(5) for details.

Options:

progress¶

show progress bars for some actions

This extension uses the progress information logged by hg commands to draw progress bars that are as informative as possible. Some progress bars only offer indeterminate information, while others have a definite end point.

The following settings are available:

[progress]
delay = 3 # number of seconds (float) before showing the progress bar
changedelay = 1 # changedelay: minimum delay before showing a new topic.


                # If set to less than 3 * refresh, that value will


                # be used instead.
refresh = 0.1 # time in seconds between refreshes of the progress bar
format = topic bar number estimate # format of the progress bar
width = <none> # if set, the maximum width of the progress information


               # (that is, min(width, term width) will be used)
clear-complete = True # clear the progress bar after it's done
disable = False # if true, don't show a progress bar
assume-tty = False # if true, ALWAYS show a progress bar, unless


                   # disable is given

Valid entries for the format field are topic, bar, number, unit, estimate, speed, and item. item defaults to the last 20 characters of the item, but this can be changed by adding either -<num> which would take the last num characters, or +<num> for the first num characters.

purge¶

command to delete untracked files from the working directory

Commands¶

purge¶

hg purge [OPTION]... [DIR]...

Delete files not known to Mercurial. This is useful to test local and uncommitted changes in an otherwise-clean source tree.

This means that purge will delete:

But it will leave untouched:

If directories are given on the command line, only files in these directories are considered.

Be careful with purge, as you could irreversibly delete some files you forgot to add to the repository. If you only want to print the list of files that this program would delete, use the --print option.

Options:

rebase¶

command to move sets of revisions to a different ancestor

This extension lets you rebase changesets in an existing Mercurial repository.

For more information: http://mercurial.selenic.com/wiki/RebaseExtension

Commands¶

rebase¶

hg rebase [-s REV | -b REV] [-d REV] [OPTION]

Rebase uses repeated merging to graft changesets from one part of history (the source) onto another (the destination). This can be useful for linearizing local changes relative to a master development tree.

You should not rebase changesets that have already been shared with others. Doing so will force everybody else to perform the same rebase or they will end up with duplicated changesets after pulling in your rebased changesets.

In its default configuration, Mercurial will prevent you from rebasing published changes. See hg help phases for details.

If you don't specify a destination changeset (-d/--dest), rebase uses the tipmost head of the current named branch as the destination. (The destination changeset is not modified by rebasing, but new changesets are added as its descendants.)

You can specify which changesets to rebase in two ways: as a "source" changeset or as a "base" changeset. Both are shorthand for a topologically related set of changesets (the "source branch"). If you specify source (-s/--source), rebase will rebase that changeset and all of its descendants onto dest. If you specify base (-b/--base), rebase will select ancestors of base back to but not including the common ancestor with dest. Thus, -b is less precise but more convenient than -s: you can specify any changeset in the source branch, and rebase will select the whole branch. If you specify neither -s nor -b, rebase uses the parent of the working directory as the base.

For advanced usage, a third way is available through the --rev option. It allows you to specify an arbitrary set of changesets to rebase. Descendants of revs you specify with this option are not automatically included in the rebase.

By default, rebase recreates the changesets in the source branch as descendants of dest and then destroys the originals. Use --keep to preserve the original source changesets. Some changesets in the source branch (e.g. merges from the destination branch) may be dropped if they no longer contribute any change.

One result of the rules for selecting the destination changeset and source branch is that, unlike merge, rebase will do nothing if you are at the latest (tipmost) head of a named branch with two heads. You need to explicitly specify source and/or destination (or update to the other head, if it's the head of the intended source branch).

If a rebase is interrupted to manually resolve a merge, it can be continued with --continue/-c or aborted with --abort/-a.

Returns 0 on success, 1 if nothing to rebase.

Options:

record¶

commands to interactively select changes for commit/qrefresh

Commands¶

qrecord¶

hg qrecord [OPTION]... PATCH [FILE]...

See hg help qnew & hg help record for more information and usage.

record¶

hg record [OPTION]... [FILE]...

If a list of files is omitted, all changes reported by hg status will be candidates for recording.

See hg help dates for a list of formats valid for -d/--date.

You will be prompted for whether to record changes to each modified file, and for files with multiple changes, for each change to use. For each query, the following responses are possible:

y - record this change
n - skip this change
e - edit this change manually
s - skip remaining changes to this file
f - record remaining changes to this file
d - done, skip remaining changes and files
a - record all changes to all remaining files
q - quit, recording no changes
? - display help

This command is not available when committing a merge.

Options: